Documents:
• Warm air to:
450 °C Modelos TMAX y TMAXL
600 About Custom ° C
NOTE: The temperatures indicated refer to recirculated air systems and thermally insulated. Note that the final temperature of heating can vary depending on the working conditions of the system (recirculation in the air, hot material, Heat losses, etc.). Our technical department is available to assist you in choosing the most suitable battery for each case.
• Minimum air speed for all models: 2 m/seg.
• Easily interchangeable Resistors.
• Other powers, voltages and sizes available on request.
• Construction according to UNE EN 60335-1.
• Three-phase Power 3 ~ 400 V with socket Land (*).
(*) The TMAX and TMAXL conexionadas batteries are supplied to the voltage indicated. Optionally can be supplied conexionadas for voltage 3 ~ 230 D V, if so specify when ordering.
Technical characteristics constructive
1 One to three glands, one stage, a more prensaestopas to control elements.
2 Cover steel connections, with resistant baked paint black to temperatures up 250 ° C without degradation.
3 One to three connection plates steatite, one per stage. Bridges internal connection.
4 Fixing bases resistors with clamping screws.
5 Mineral fiber insulation (base and drawer box).
6 Resistors base steel resistant baked paint color black box at temperatures up 250 ° C without degradation, and the inside of stainless steel.
7 Rods stainless steel for anchoring the guide base and clamping the end cap.
8 Guide final stainless steel resistance to withstand. In other models TMAXL intermediate support.
9 Resistance armored in stainless steel pipe AISI 321 from 304 de Ø10 mm, in alignments 6 elements of ~ 230 V with outputs 750 W (models Tmax) or 1500 W (models TMAXL) everyone. In stockstock and TMAX TMAXL heating elements and stainless steel models Incoloy ® -800 Ø10 mm
10 Probe keep it 6 Ni Cr / Ni Al (type K) with aerial plug and socket bayonet
All stainless Option: If desired, can be supplied on request TMAX and the battery fully TMAXL stainless steel: connection cover, cash basis setting resistors and drawer.