Cartridges monotube heating very long

Electric heaters monotube high maximum length allowed surface temperature up 600 °C.
The Maximum working temperature It is directly related to the Charge Density (in this case up to 12'2 W / cm ²) and the maximum clearance hole where the heater is housed. So, we can say that the higher the operating temperature we get a smaller gap.
In the case of the heating load average monotube, to a working temperature in the mold of 400 ° C is necessary to make a hole with minimal H11 (+0 +0’09 mm for all lengths).
On request, we can manufacture heating monotubo of O10 mm rod 1450 Longitude mm. Also other voltages on request.
Main Features
• Tubo en stainless steel AISI 321 Welded [def]TIG[/def] • laminate tube and calibrated WITHOUT chipping
• Resistance of Nickel-Chrome wire 80-20
• magnesium oxide insulation electromelted very compacted.
• Connects with braided pigtails nickel, silicone coated glass fiber, stapled with stainless steel tubular wire terminal on nickel from the cartridge, de 250 mm.
• Standard Voltage 230 V ~.
• Low order, we can manufacture heating monotubo of O10 mm rod 1300 Longitude mm. Also other voltages on request.