• Heater electric Class I.
• Head Watertight with Degree IP67 protection against moisture(*) cast steel, except in model C405 stainless steel AISI 316.
• The top of the head incorporates a Thread Female 1/2″ Gas to attach a tube intern.
• heating element in pipe stainless steel AISI 321, except for C405 models in AISI 316L.
• Of the vainas oint 8,5 mm tubes or bulbs to thermostats in the C405 model
• Sealing.
• For installations acid / base or dense liquids especially liquids can be fabricated into tube stainless steel 316The, Incoloy®800, Incoloy®825, and / or lower charge densities.
(*) The IP67 protection is ensured in the final installation with the appropriate fittings and joints in the Thread FEMALE 1/2 "Gas.
Let through a tube 1/2″ properly coupled to the gas heater to keep the COPA Degree protection against moisture, prolong and protect the connecting cables, creating the cold zone and exit to the outside according to your needs.
The C405 model comes equipped with two pods. The pods can be used to implement control and safety elements, such as thermostats cane TER-xxx-adjustable NEF 0 at 80 ° C, the temperature limiters Automatic reset o manual. The C405 model also supports within two pods security elements such as fuses for external temperature, range 15 A de 60 °C y 93 ° C temperature safety cut in rearmable and thermostats Automatic reset models 9700 (13 A) de 75 °C y 90 °C.
All other models support the placement of the security features mentioned above within the COPA, except thermostats cane.
