The submergers for aggressive baths RG range are used for heating of various types of substances and solutions of a Process, the chemical, electrolytic, Surface coating.
Main Features
• heating element made of ceramic support high Quality and resistive wire Alloy Ni-Cr.
• EPDM head for models for all models with scabbard Ø25, Ø30 and Ø33 mm and also for models with lead sheath Ø52 mm.
• Head of Bakelite with Degree IP65 protection for china models Ø40 mm and all models with Ø52 mm sheath except models with lead sheath.
• Cable silicone hose 2 from 3 threads + Taking Land de 1500 mm (for different cable lengths, specify when ordering
• Heater electric Class I
• Standard voltages: ~ 230; 2~ 400 V; 3~ 400 V
• Material of sheath:
Titanium – Ø25 mm / Ø52 mm
Quartz – Ø30 mm
AISI 316L – Ø33 mm / Ø52 mm
Porcelain – Ø40 mm
Pyrex – Ø52 mm
PTFE – Ø52 mm
Lead – Ø52 mm
Applications
Chemical baths:
• degreased
• Pickled • Polishing
• Fosfatado
• Electropolishing • Zincado • Cadmiado
• cobrizo
• Nickel • Chrome • Plateado
• De oro
• Fijado
• Coloreado
How to use
• The skimmer is supplied without any control element, the user must connect the various electrical circuits and drives for operating the skimmer.
• Check yourself periodically sealing head to verify that there is no deterioration of internal connections corrosive action of vapors and liquids.
• The skimmer has a mark that indicates the Hotspot. To ensure correct operation is essential that the mark will always be completely submerged.
• For electrical connection, must be immersed in the bath.
• To detach the bath, must be electrically disconnected and wait at least 15 minutes or until the heating element has cooled.
• Before installing the submerged, check that the sheath material is appropriate for the type of bath in which it will be submerged. A tal fin, and guidance purposes only, we offer below a table of recommended materials sheath depending on bath. The final choice may be based on working conditions, manufacturer's recommendations corrosive material, o bien, by a preliminary test. ELECTRICFOR, S.A. can not be responsible for any problems caused by corrosion, since different conditions and factors, often unknown, can vary the effectiveness of the sleeve.
