Groups Heaters with harness, fabrications as. Construction GCB-R

GCB groups Heaters-r bridados elements are interchangeable with resistance. If you use principalemente, in applications where the compromise that expose the resistors is very high, and should foresee the continuous replenishment.

The manufacture of such elements is solder pods to the coupling flange. These pods, serve to house the resistances, and allow recambiarlas at the time they cease to be operative. The connection and disconnection of the resistors is done in a very simple way, since this type of apparatus incorporates power distributors. These dealers, allow electricity from direct client connection, toward the total heating elements.

This design with interchangeable resistors, can be performed according to the Process GCB manufacturing-C, suppressing the resistance welding.

Optionally can make other types of interchangeable resistors (candelas, monotubos, etc.).
Main Features
• Power to customer
• Three-phase supply to 750 V
• Specific load up 16 W/cm². Recommended loads by application
1 at 3 W/cm² – Air, stoves
1,2 W/cm² – Heavy fuel oil
2 at 4 W/cm² – Thermal oil, fuel oil or light media
6 at 8 W/cm² – Water
• armored elements in a "U"
• Material of the cover tube in stainless steel AISI 321, AISI 316L, Incoloy®-800, Incoloy®-825 ó Cobre Nickel • standard tube diameters: 8mm, Ø10, Ø12'5, Ø16 mm
• Longitude Llano Platinum maxim: 3300 mm for all lengths
• fully standardized Bridas: DIN – ANSI steel or stainless steel • Junction boxes with Degree moisture protection to IP-66
• Temperature Control by Thermostat, limiter, probe the thermocouple probe Pt100