Exclusive polytetrafluoroethylene coated heaters PTFE.
These resistors are specially designed to heat a wide variety of corrosive liquids except hydrofluoric acid.
The final choice may be based on working conditions, manufacturer's recommendations corrosive material, o bien, by a preliminary test. ELECTRICFOR, S.A. can not be responsible for any problems caused by corrosion, since different conditions and factors, often unknown, can vary the effectiveness of the sleeve.
These resistors are specially designed to heat a wide variety of corrosive liquids except hydrofluoric acid.
The final choice may be based on working conditions, manufacturer's recommendations corrosive material, o bien, by a preliminary test. ELECTRICFOR, S.A. can not be responsible for any problems caused by corrosion, since different conditions and factors, often unknown, can vary the effectiveness of the sleeve.
IMPORTANT: The Maximum working temperature is 90 ° C for liquids with Boiling point inferior a 110°C, and 35 ° C for liquids with Boiling point superior a 110°C.
Main Features
• hermetic head with molten resin Degree moisture protection IP-67.
• Cable silicone hose 2 threads + Taking Land de 1500 mm.
• Heater electric Class I
• Standard Voltage 230 V ~
• Material of tube: PTFE Ø12mm
Applications
Chemical baths:
• degreased
• Pickled • Polishing
• Fosfatado
• Electropolishing • Zincado • Cadmiado
• cobrizo
• Nickel • Chrome • Plateado
• De oro
• Fijado
• Coloreado
