Main Features
• Standard model for cans 200 Lts (Ø580 mm).
• Elements armored AISI 321 from AISI 304L.
• Exterior clamp isolated with mineral blanket protected sheet steel Galvanized • double buckle closure.
• Power 1,3 kW (2×650 W)
• Standard Voltage 230 V ~
• Other dimensions, power and voltage available on request.
How to Use
• Place the bracket as low as possible in the drum, ensuring that it is making good contact with the surface of the. (No place on the stiffeners reliefs).
• Check that the fluid level is higher than the position of the clamp. If the liquid level changes are expected in the drum, See our magnetic level switches and level controls for conductive liquids, and granular solids
• Check the maximum temperature at which heat can be Fluid, and if, post Thermostat in the drum and make the relevant connections.
• Do not install in containers made of plastic materials or derivatives.
• Do not cover the container tightly. Warming Fluid with the drum closed may cause an increase in pressure inside the. If this situation is not possible, is recommended that a switch to limit the pressure inside the drum.
